Change Currency: USD

SUPER POWER HD 5W 5000mW FPV PORTABLE 4CH 2.4G Wireless A/V Transmitter Receiver

$169.99

Product Information

HIGH POWER 2.4G 5000mW LONG DISTANCE 4-CHANNEL PORTABLE LIGHT WEIGHT WIRELESS AUDIO VIDEO TX TRANSMITTER & RECEIVER LINK TRANSMISSION DISTANCE 100-2000 METERS

This Is What You'll Get

  • Power Adapters are sold separately, contact us if you need power adapters.
  • One 2.4G (2,400 MHz - 2,483 MHz) 4-Channel Wireless Transmitter 5000mW, PORTABLE AND LIGHT WEIGHT
  • One matching 4-Channel Wireless Receiver
  • Two Antennas: one for transmitter and one for receiver ($49.99 FREE BONUS!!!)
  • Two AV Cables: one for transmitter and one for receiver
  • English User's Guide includes detailed step-by-step instructions 

 

https://yantechusa.com/images/source/eBay2013/5W_2.4G_1.JPG

 

https://yantechusa.com/images/source/eBay2013/5W_2.4G_2.jpg

 

 

 

  https://yantechusa.com/images/source/eBay2013/5W_2.4G_3.jpg

4200 connection

Connection Picture

 


  •  

Special Features

  • Brand new Wireless Transmitter & Receiver kits you can set up in 5 minutes
  • Up to 1000 meter/3280 feet "line of sight" (LOS) outdoor in open area  (see note below)
  • 8 selectable channels while use of non-interference
    Frequency: 2414MHZ 2432MHZ 2450MHZ 2468MHZ (normal rate)
    Extended Frequency: 2370MHZ 2390MHZ 2490MHZ 2510MHZ (extended frequency) 
  • Internationally accepted open 2.4GHz band, anti-interference ability, clear and stable image
  • Band transmission 2.4GHz, transmission power 5000mw
  • Standard RCA type audio/video input and output! 2-way audio signal device provides audio (input/output) channels, 1 video (input/output) channels
  • Video input/output standard: PAL/NTSC, video input/output impedance 75 ohms
  • Audio input/output format: 6.0MHZ / 6.5MHZ; Audio input/output impedance 1k ohms
  • 2-way audio signal device provides audio (input/output) channels, 1 video (input/output) channel
  • The power adapter DC output plug into the transmitter's DC outlet; the transmitter power adapter 12V2A, receiver power adapter 12V1A

 

*Note: The wireless transmission reception result could vary depending on environmental and topographical conditions, based on a lot of factors such as the above ground clearance distance, the material/structure of the building environment in between, whether there is a LOS, other electronic and appliances in the same environments, the topology, the temperature and humidity, weather the transmitter or receiver is moving, etc. The LOS range in the specification is the manufacture lab rating in a "perfect" environment with the high gain antenna.The system is designed for high quality image transferring not super high quality audio transferring such as hosting a concert.

 

Connecting Instruction

  • Connect the antenna of receiver to the receiver.
  • Connect the AUDIO and VIDEO OUT of receiver with the AUDIO and VIDEO IN of monitor using AV cable.
  • Plug regulative power plugs of DC power transformer into the jack of receiver power.
  • Connect the antenna of transmitter to the transmitter.
  • Connect the signal input connector and vidicon using special cable.
  • Plug regulative power plugs of DC power transformer into the power jack of special cable.
  • The channel of receiver and transmitter must be matched. Transmitter is 12V regulative power, receiver is 12V switch power, the center of jack is positive.

 

User Instruction

  • Transmitter is 12V regulative power, receiver is 12V switch power, the center of jack is positive.
  • Transmitter has a special cable for connection. The red connector is for power input, the black one is for vidicon power supply, the yellow one is for video output, and the white one is for audio output. The jack connects to the transmitter directly.
  • Receiver has a special cable for audio and video. It connects the receiver and monitor. The VIDEO OUT in the receiver should be connected with the VIDEO IN of the monitor. The AUDIO OUT in the receiver should be connected with the AUDIO IN of the monitor.
  • In default, you needn’t adjust the system when all the components are connected together, the channel of transmitter and receiver are matched.
  • Please connect the antenna first before the power of transmitter starts, otherwise the transmitter will be destroyed easily because most of the energy is consumed in it. If you want to change the channel, you can change the jumper’s place, the jumper is at the side of transmitter. The switch must be changed at the same time, the switch is near the AUDIO OUT of receiver. 
  • Please select the outside directional antenna if the output is large power. If you use the small all-direction antenna, it will produce big transmitting current, the temperature of antenna will rise, transmitting power of antenna go down.
  • The power of higher than 12V is not permitted.
  • Make sure which is the positive or negative of power connector. The inside is positive, the outside is negative.
  • If you want to transmit to a longer distance, please use the directional antenna, the transmitting distance of it is 2 or 3 times than the all-direction antenna’s.

Product Code: 5000mw_2.4G

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

Mobile Site